X-VCI For GM MDI

X-VCI ( GM MDI)
支持：GM ,OPEL,SAABGM車型：1990—2012
1990—2009.6車型用里面TECH2 win軟件，相當于PC版本的GM TECH2
2009.6 ---2012用GDS2軟件特點
*覆蓋所有的通用、沃克斯豪爾、歐寶等車型，包括ECU-reprogramming，鑰匙編程，ECU的reflashing，和很多其他的功能...
*GDS（全球診斷系統）是唯一能做到覆蓋所有車型或模塊的掃描工具，它能給你提供最新，最準確的數據。
*再沒有通信問題
*再沒有未知的故障代碼或亂碼
*引導故障定位可以快速又輕松地幫助您查找和維修車輛掃描系統，甚至通用工具也不能做到
*一個龐大的數據庫中的校準文件給你預先加載到所有ECU reflashes訪問和配置必要的。X-VCI GM MDI (Multiple Diagnostic Interface) for ECU reprogramming utilizing J2534. Hardware kit only.
The X-VCI GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform Pass-Thru programming on all vehicles built since 1993 and will support all vehicles into the future.The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008.
When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data during road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this purpose. Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.
In Future, the Tech 2 remains an essential tool through at least the 2010 model year. And X-VCI GM MDI can work with tech2win,it can replace the Tech2.So,V-vci can work with Tech2Win and GDS2,It can support all the GM,OPEL,SAAB cars.
Note: Requires software subscription to GM SPS (Service Programming System), which must be purchased separately via the ACDelco Tech Connect website

Hardware Specification:
Processor: 32 BIT high speed ARM processor
Flash: 512KB
RAM: 64KB
Diagnostic Socket: J1962 OBD-II 16 connector
Wired socket: USB2.0/USB1.1 compatible
Light: 4 LED light, indicating work statuses
Power: Vehicle power input: DC 9V-36V, or USB DC 5V
Consumption: Below 1W
Size: L x W x H=166 x 95 x 33(mm)
Working Temperature: -20~ +70 °C
Storage Temperature: -40~ +85 °C

Package including:
1pc x X-VCI GM MDI Main unit
1pc x OBDII 16Pin Adapter
1pc x Main Cable
1pc x USB Cable