• 電壓12（V） (V)
• 類型汽車故障診斷儀
• 品牌ecuobd
• 適用車型所有
• 型號Vgate CLK OBD2 WiFi

聯系方式QQ：56628478 TEL:13410057177 汽車診斷設備淘寶店鋪：http://ecuobd.taobao.com 說明：
CLK的無線網絡(luò )可以使您透過iPhone或iPod touch上以無線方式與汽車OBD2診斷插座連線。
如果是與電腦相連，需要有無線局域網無線路由器的裝置。

支援通訊標準
國際標準組織9141
ISO 11898的（CAN）的
國際標準組織14230（KWP2000）
國際標準組織15765（CAN）的
SAE的J1939的

使用相容性統計
適用1996年以后車款，OBD2功能請參考ELM327 RS232/USB/Bluetooth。
本車種測試系參考國外測試資料，但不同國家不同地區的同樣車種，可能因車廠區域化策略配備不同而結果不同。
車款相容性請參考買家使用本產品統計

支援電腦軟體：
Dashcommand由PalmPerformance為Win 95/98/ME/NT/2K/XP/Vista/7
ScanXL臨
ScanMaster - ELM的2.1版。

支援iPhone / iPod Touch的軟體：
由PalmPerformance DashCommand（約合49.99）
FuzzyCar
FuzzCodes
LogWorks
PLX公司記錄儀
馮建興（試用版）
牧師的DevToaster 2.0.2（約合39.99），選擇PLX公司的WiFi連線獼猴桃
Speed??port
注：可至蘋果隆重登場AppStore的下載或購買軟件。
目前提供Dashcommand，牧師，ScanMaster。

規格：
的SSID：CLKDevices
固定的IP固定IP：192.168.0.10
子網域子網：255.255.255.0
傳輸埠口：35000
范圍：50?500米（室內?空曠）
天線：內建
耗電量：0.85瓦
無線標準：802.11a/b/g的
操作溫度：攝氏-15至100度
外殼：塑殼（車規等級）
尺寸：2.85 × 1.2 x 0.7英寸
線長：180厘米
額外支援：無
發光二極管指示燈：無線上網/發送/接收/電源
保固：1年

硬體操作說明：
使用iPhone 4，iPod的，iPad的連線：
選擇的Wi - Fi
勾選CLKDevices
請將iPhone 4，iPod的，iPad的設定為固定的IP
的IP位址：192.168.0.12?192.168.0.20等等。
子網路遮罩子網255.255.255.0
傳輸埠35000

使用電腦連線：
進入控制臺>網路連線>無線網路連接
點選[內容]
Internet協議（TCP / IP協議）
勾選[使用下面的的IP位址]
的IP位址：192.168.0.12?等
子網路遮罩子網：255.255.255.0
按[確定]
按螢幕右下角時間旁的[電腦無線]檢查基地臺狀態
雙擊[CLKDevices]
顯示[已連接上]即可


軟體設定：
馮Lite的軟體：
搜尋硬體192.168.0.10，選取PLX公司獼猴桃無線連線。

Dashcommand（DsahCMD）：
連線設定：的OBD - II接口類型：榆林
連線設定：輔助輸入類型：無附有此產品詳細操作說明

• 聯系方式QQ：56628478 TEL:13410057177 汽車診斷設備淘寶店鋪：http://ecuobd.taobao.com

WiFiOBD-II Car Diagnostics Tool for Apple iPad iPhone iPod Touch

Function:

1.Primary Function:WiFi OBD-II Car Diagnostics Tool for Apple iPad iPhone iPod Touch
2.Compatible Apple Devices:Depends on the WiFi OBD Software used, but will require Apple iPhone, iPod touch and iPad iOS 3.0 or later and with WiFi capabilities.

Specifications:

1.Applicable Car Models: All models that support the OBD standard (Volkswagen, GM, Honda, TOYOTA, Nissan, Mazda, Ford, Peugeot, Citroen, BMW, Audi, Skoda, Subaru, Hyundai, Kia, Suzuki, Opel, Chyrysler, Benz, Porsche, Renault, Fiat, Mitsubishi, Isuzu, Daihatsu, etc.)
2.Languages: Depends on WiFi OBD Software
3.Dimensions: 67 x 21 x 31mm
4.Cable Length: 1.88 meters

Support carlist:

GM 1996 - to Date (OBD-II)
Ford 1996 - to Date (OBD-II)
Chrysler 1996 - to Date (OBD-II)
Toyota 1996 - to Date (OBD-II)
Honda 1996 - to Date (OBD-II)
NISSAN 1996 - to Date (OBD-II)

Many other Asian and European 1996 - to Date (OBD-II)Functions 1. Read more than 3000 car manufacturers' standard DTC and private DTC (diagnostic trouble codes) and its meaning.
2. Clear DTC, turn off dashboard MIL "Check Engine" Light.
3. Display sensor data, including:With proper software installed in the host device, you may have following parameters read out from your vehicle:
Absolute Throttle Position
Barometric Pressure
Calculated Engine Load
Engine RPM
EVAP System Vapor Pressure
Load
Engine Coolant Temperature
Fuel Consumption*
Fuel Level
Fuel Pressure
Fuel Status
Fuel Trim
Intake Air Temperature
Intake Manifold Pressure
Vehicle speed
Intake Manifold pressure (MAF/MAP)
Oxygen sensor voltage /short term fuel trim
Timing Advance
Throttle Position*note:
Your vehicle may not support all above parameters.
How many parameters you can get is depended on the vehicle manufacturer’s implementation.Applicable vehicle types/brands in general:Audi, BMW, Cadillac, Chevy, Chrysler, Citroen, Dodge, Fiat, Ford, Geo, GMC, Honda, Hyundai, Isuzu, Jeep, Kia, Land-Rover, Mazda, Mercury, GM, Mercedes-Benz, Mini, Mitsubishi, Nissan, Oldsmobile, Pontiac, Opel, Peugeot, Renault, Saturn, Saab, Subaru, Suzuki, Toyota, Volkswagen, Volvo, Can-bus enabled vechicles
Package list:

WiFi OBD-II Car Diagnostics Tool for Apple iPad iPhone iPod Touch
CD with User Manual

FAQ:

Q:Will This Code Reader Work with My Car?

A:1.This OBD II Code Reader is specially designed to work with all OBD II compliant vehicles. It is required by EPA that All 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all Domestic, Asian and European vehicles.
2.A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate OBD II Certified. Additionally, Government regulations mandate that all OBD II compliant vehicles must have a common 16pin Data link Connector (DLC).
3.For your vehicle to be OBD II compliant, it must have a 16 pin DLC (Data link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. This label is located on the inside of the hood on most vehicles.

Q:My Apple device finds and connects to this product, but nothing is working?

A:After you connect with WiFi, set a static IP on your Apple device with: IP 192.168.0.11 or 192.168.0.10 and subnet mask: 255.255.255.0.